DPX2 series 2
Satellite-IF Diplexers DPX2 series
Featurs
Mini Size
Wideband, up to 2.5 GHz
Flat Passband
Low Insertion Loss
Rejection 40dB
Excellent Return Loss
High Stability
Die-casting Housing
High RFI Shielding
Precision Connector Thread
Good Plating Quality
Good Weather Resistance
 Item DPX2 - 1450 / 1550
  Impedance 75 ohm
  Frequency Range 5 - 1450MHz 1550 - 2500MHz
  Insertion Loss 0.5dB (typ) / 2.5dB (max) 0.6dB (typ) / 2.5dB (max)
  Return Loss 16dB (typ) / 10dB (min) 15dB (typ) / 10dB (min)
  Rejection (Isolation) 40dB (typ) / 20dB (min) 50dB (typ) / 20dB (min)
  Power Passing DC 30V / 500mA (max) Blocked
  Dimensions 18(H) x 54(W) x 45(D) mm
  Net Weight 46.5g

 * Specifications may be change depending on the model or customer's requirement.

The DPX2 is a mini-size diplexer series, designed for applications in satellite reception systems to combine or separate two different signal bands. For example, to combine or separate C band / Ku Band or Hi Band / Low Band.
Despite its small size it has exceptional performance such as a typical rejection of 40dB, a return loss of 14dB (typ.), a very even pass band and an insertion loss of less than 1dB (typ.).
Apart from the excellent electronic specifications, it boasts a high quality die-casting housing with high RFI shielding effectiveness.
In addition to the general models in the table below, the satellite-IF bands can be designed according to customer specifications.
For more diplexer products, please see our diplexer category.

Model Bnad 1 Band 2 Note
DPX2-1450/1550 DC - 1450 MHz 1550 - 2500 MHz  
DPX2-1450/1600 DC - 1450 MHz 1600 - 2500 MHz  
DPX2-1450/1650 DC - 1450 MHz 1650 - 2500 MHz DISH Network Approved
DPX2-1640/1820 DC - 1640 MHz 1820 - 2300 MHz