PI1 series
3 GHz Power Inserter
Featurs
High RFI Shielding
Support DOCSIS 3.1, up to 3 GHz
Low Loss
High Isolation
Excellent Return Loss
Flat Passband
Robust Die-casting Housing
Excellent Connector Thread
Exquisite Plating Quality
Good Weather Resistance
Item PI1 - 123
  Impedance 75 Ohm
  Frequency Range 10 - 1000 MHz 1000 - 2300 MHz
  Insertion Loss 0.5 dB(typ) / 1.0dB(max) 1.0 dB(typ) / 2.2 dB(max)
  Return Loss 20 dB(typ) / 12 dB(min) 16 dB(typ) / 12 dB(min)
  Isolation 60 dB(typ) / 50 dB(min) 45 dB(typ) / 30 dB(min)
  Voltage Withstanding DC 100 V(max)
  Current Passing DC 1 A(max)
  Dimensions 18(H) x 54(W) x 45(D) mm
  Net Weight 46.5 g
 * Specifications may be change depending on the model or customer's requirement.

Sometimes TV, CATV, MMDS or satellite reception system set-up need a power inserter.

Although the power inserter is only a small device in the system, a bad power inserter can have a large impact on signal quality, the most common being the generation of intermodulation distortion.

Are you looking for a better power inserter? Now, you got it.

The PI1-123 is a newly designed power inserter and has many features (see below).

1. Minimum insertion loss, minimized signal loss.

2. Excellent return loss provides good impedance matching to prevent intermodulation distortion and reduce signal loss and noise levels, ensuring that the signal is clean.

3. High isolation, which can reject the signal leakage to the power port or power noise pass through to the signal end, causing cross-modulation distortion.

4. The PI1 has two flexible screw mounting holes, one screw mounting hole and one ground screw hole for flexible mounting and grounding wire installation for safety.

5. Closed and thick die-casting housing provides very good RFI shielding performance.

Model Frequency Range
PI1-123 10 - 2300 MHz
PI1-130 10 - 3000 MHz
PI1-132 10 - 3224 MHz